❯ FAA ground-stop probe focuses on data flooding from two sites, with the agency saying SMART AI was unrelated
A more specific explanationIn its November 15 official questions and answers, the FAA said its legacy communications network was overwhelmed by approximately 1,000 connection attempts every four to five seconds. The preliminary inquiry identified potential sources at Amarillo, Texas, and El Dorado, Arkansas, where network provider L3Harris had been performing work including a new router deployment.
Recovery in stagesThe nationwide ground stop began around 3:30 p.m. Eastern on November 13, with air traffic resuming at 8:15 p.m. after the system stabilized. Airlines then continued repositioning flights and crews. The FAA said isolating the two sites stabilized the network, and the relevant broadcasting function was disabled on roughly 60 similar routers as a precaution. The root-cause investigation continues.
From local sites to most centersThe FAA said 17 of its 22 en-route centers became unstable, with effects spreading into some terminal approach facilities. Radio and radar did not fail entirely: some frequencies and feeds remained usable, allowing controllers to follow established safety procedures. Approximately 3,500 aircraft were airborne when departures stopped and, according to the agency, all landed safely. Pausing departures avoided adding to the airspace workload.
Maintenance and root-cause reviewRouter replacement at the remote El Dorado site was routine work performed for years without such daytime disruption. The FAA says maintenance timing will be reconsidered. Its published answers report no evidence of a cyberattack while the investigation with L3Harris continues into how the traffic destabilized legacy systems. Isolation and disabled broadcasting are immediate measures; the full root cause and longer-term preventive changes remain under review.
SMART was separateEarly accounts linked the outage to a network update and reboot; the official explanation now focuses on abnormal data traffic and legacy-network instability. The FAA explicitly says SMART aggregates data and makes recommendations without feeding information into the air traffic control system, and that it was unrelated to the outage. Network recovery and airline schedule recovery are separate processes, allowing delays and cancellations to persist after the ground stop ends.
▮ SIGNALAviation upgrades depend on isolating faults between old and new equipment: a local network problem can create nationwide scheduling disruption long after service resumes.